The Pilot Varsity is sold as a disposable fountain pen, but it seems like such a shame to throw one away once you’re done with it. Instead of tossing it in the garbage, what if you could refill it? Good news… you can! In this article I’ll show you how to refill a Pilot Varsity (or Pilot Vpen as they’re known outside of the United States) with any ink you’d like. For demonstration purposes, I’ll be using a Vpen, but the process is exactly the same with a Varsity.
Why Refill A Pilot Varsity?
You might be wondering, “why would I bother refilling a disposable fountain pen?”. That’s a fair question. They’re not the highest quality pens around. They’re meant to be thrown away. What’s the point in keeping them around? For me, it comes down to a few things. First, I don’t like wasting something that can be used again. Second, there are times when you’ll want a pen that you don’t have to be very careful with, but still might want to use a fun color of ink. There might also be times when you want to use an ink that you wouldn’t normally use in a higher quality fountain pen. For example, maybe you have an ink that is notorious for damaging pens but you still want to try it out. I did this with vintage Parker 51 ink, which is known for damaging pens it is used in. I had some and wanted to write with it, but didn’t want to use it in one of my good pens.
There are times when you’ll want a pen that you don’t have to be very careful with.
Disassembling The Pen
Disassembling a Pilot Varsity is both extremely simple and slightly complicated. All you have to do is pull hard on the nib and the entire feed section will come out of the pen. The trick is pulling on it and not damaging it, hurting yourself or getting too dirty in the process.
The first thing you’ll want to do is gather the supplies you’ll need. The short list is:
– Something to grab the nib with
– A towel to clean up any spills and wipe your hands on
– A container filled with water to soak the section in
I also like to do all of my pen work on a cooking sheet. This helps protect surfaces, contain spills and lets me easily move my project if I need to.
To remove the nib and feed, all you need to do is grab the nib firmly and pull. You’ll want to be extremely careful with this step, as it has the highest potential to make a mess. Remember, everything you’re pulling out of the pen is probably covered in ink, so pull gently. If it helps, you might gently twist the nib to help it slide out more easily. You should feel it start to move, so it shouldn’t pop out unexpectedly.
I also like to use something to grab the nib with. This helps me to grip it better and also protects my hands. I prefer a thin piece of rubber that’s meant to help open jars, but you could also use a piece of cloth. The important part is that it helps keep your fingers clean and unharmed, as the nib can be a little sharp on the edges.
Cleaning The Pen
Once the nib and feed section is out of the pen, you’ll want to put it in water to soak out the old ink. Before soaking, you might run it under some cool water to rinse of any excess ink. You’ll also want to clean out the barrel of the pen. Again, a quick rinse with some cool water and then an overnight soak should be all it needs.
Once the parts have soaked, you’ll want to make sure that all of the old ink is completely out of the pen. Wipe down the nib with a paper towel. Any water that comes out should be clear. If it’s not, you can soak it again or run water through it until it comes out clear. Once you’re happy with how clean the pen is, set it out to dry overnight. If you want to fill it immediately, use a paper towel to dry out any remaining water from inside the barrel and give the nib and feed a good drying as well.
Refilling The Pen
Now that you have a dry pen, it’s time to fill it with the ink of your choice! Since it’s not meant to be refilled, the Pilot Varsity doesn’t have a filling mechanism. Instead, you’ll have to fill it with some sort of dropper or syringe. Personally, I use these pipettes, which can be found at most chemistry supply stores. To fill the pen, simply suck the ink you want to use from the bottle and squirt it into the barrel of the pen. Be sure not to fill the barrel too full, otherwise ink will squirt out when you push the section back into the pen! If you can see the ink in the clear part of the barrel, you’ve filled it too full.
Once you have the pen filled, it’s time to replace the nib. To do this, simply push the section back into the barrel. It should push in easily most of the way, but you’ll encounter a bit of resistance right before it goes all the way in. Make sure you feel it “snap” into place, otherwise it might not be fully seated and will leak! It should be seated below the surface of the barrel when you’re finished.
The ink should start flowing fairly quickly. If it’s a little slow, you can encourage it by holding a paper towel on the surface of the nib. This should get the ink flowing via capillary action. Now that your “disposable” Pilot Varsity is filled with brand new ink and is ready to write, the only thing left for you to do is enjoy it!